You can pay us by credit card with

Details provided on invoice or call for more information.

ORDERS UNDER $100 DISPATCHED IMMEDIATELY. ORDERS OVER $100 1-2 WORKING DAYS.

SHELF KIT INSTALLATION

  1. Router or chisel a trench out on the back of the corbels 16mm wide by 5mm deep and 55mm long
    .


  2. Fit keys and screws as pictured. (Keys and screws are available at $0.70 per pair)



  3. Make your top blocks 120mm x 95mm x 19mm. Router 3 edges to a shape if desired and drill holes as pictured. (Top blocks/ready to use are available at $2.75 per pair)



  4. Screw top blocks onto corbels using 1 1/2" 8gauge wood screws. The top block should be flush at the back. There should be even overhang either side. Pilot holes should be drilled first to avoid any splitting.



  5. Next, mark your wall where you want the shelf, making sure the holes are at the same height (use a spirit level). The distance between the holes will vary depending on the length of the shelf and should be about 220mm - 350mm shorter than the length of the shelf. EG. Using a 900mm long shelf the holes should be about 650mm apart.

    If drilling into brick use 6mm plastic plugs. The screw should be about 1 1/2" long and must be 8 gauge thick. Leave the screws protruding from the wall about 5-7mm.
     

     
  6. Place corbel over the screw head into the key and pull down till it locks in. You may have to adjust the screw inwards for a firmer fit or outwards to loosen to place the corbel on it.

  7. Once the two corbels are secure on wall place your shelf on top and screw up into the shelf from below. A shelf around 140-190mm deep would be ideal.
     


  8. For an extra $6.00 plus the price of a pair of corbels we can router, fit keys and supply blocks, screws and plugs. Blocks are also available for 90mm wide corbels. Contact us for details.

Download these instructions as a PDF file HERE.

 


CORBEL INFORMATION

Corbel Supplies
We are a leading stockist of hand crafted wooden corbels and decorational (wood) carvings.

  • All carvings are hand carved in Radiata Pine (M=Mahogany).
  • All sizes are height by width by depth (To furthest point).
  • All prices in Australian Dollars (AUD).
  • Delivery is extra and calculated before dispatch of order.

Corbel Supplies is proudly a South Australian owned and operated business which is operating from Adelaide.

 

A DIVISION OF ROBERT GOODWIN INVESTMENTS PTY.LTD.
5 FITZROY AVENUE, CAMDEN PARK,
SOUTH AUSTRALIA, 5038.
PO Box 53, Plympton, 5038
ABN: 95 078 918 573
PHONE: + 61- 8 - 8294 8989
FAX: + 61- 8 - 8376 8929
E-MAIL: sales@corbelsupplies.com.au
Within Australia Phone: 1800 656 605

Pages designed and copyright © OPTICAL DESIGN 2006. All rights reserved. E&OE.  

Copyright and Disclaimer